It is making up of de-coiler, guide rack, roll forming, correction, cutting-to-length (punching), collection table, electrical control system etc.
1,Machine capacity: width¡Ü500mm, thickness:1-3mm
2¡¢Product speed: 0-15m/min
3¡¢Total power: about35.5kw
5¡¢Occupy ground area: length 18m xwidth3m
Each part main parameter:
1 De-coiler: de-coiler, Inner expanding type, capacity:5T
2 Guide Rack: two pairs of lever rollers and four pairs of standing rollers.
3 Flatting number: 9 sets
4 Roll forming
4.1 Type: GY180
4.2 Rack: Cast iron Torii type, material: HT200
4.3 Roll forming rack: 12 sets
4.4 The diameter of the roller axis:¦Õ80mm, roller surface:500mm
Material: 40Cr quenching treatment HB280
4.5 Drive type: every rack has one gear power distribution box.
4.6 Main power: 30kw frequency conversion, ZQ500 reducer
4.7 Material: GCr15, Quenching, Hardness: HRC58-62º
4.8 Assistant roller rack: 4 sets
5, Adjust part: Turkey emendation type(three-dimensional emendation)
6, Cutting-to-length device: Hydraulic pressure cutting£¬power:5.5kw